Corflute® A-Frames

Corflute® A-Frames are lightweight freestanding signs made predominantly from printed corrugated plastic. The board is printed, cut and creased to form an A-shaped display that can stand without requiring a traditional metal A-Frame.

They're commonly used for retail promotions, events, directional signage, open homes, exhibitions and short-term advertising. 

Our Corflute® A-Frames are produced from 3mm Australian-made Corex Corflute®, a corrugated polypropylene board.

Corflute® is lightweight, water-resistant and suitable for a wide variety of temporary indoor and outdoor signage applications.

Yes. Corflute® A-Frames are designed as a double-sided display, giving your customer's artwork visibility from both directions. 

Yes. The two sides don't need to contain identical artwork. This means one side could advertise one offer while the reverse promotes another, or both sides can use the same artwork when maximum repetition is preferred. 

Yes. You can order multiple artwork kinds within the same job, including uneven quantities. This is ideal for resellers producing signage across different stores, properties, venues or campaign locations while keeping the product specifications consistent. 

Each A-Frame arrives flat-packed and ready to assemble via interlocking tab. No separate metal frame is required, making setup quick and keeping the finished product lightweight and portable. 

The integrated carry handle in the design makes the A-Frame easier to pick up and move between locations while maintaining the lightweight, one-piece construction. 

Yes, Corflute® is water-resistant and suitable for outdoor signage. However, Corflute® A-Frames are intentionally lightweight, so care should be taken in windy conditions.

For exposed outdoor locations, the A-Frame should be appropriately secured or weighted to reduce the risk of it moving or blowing over. 

Corflute® A-Frames are best suited to promotional, temporary and semi-permanent signage rather than permanent outdoor installations.

Their lightweight construction is one of their biggest advantages for transport and setup, but customers requiring a heavier long-term pavement sign may be better suited to a metal A-Frame. 

Yes. One of the biggest advantages of Corflute® A-Frames is their ability to be supplied and stored flat.

This makes them much easier to transport and store than traditional metal A-Frames, particularly when supplying larger quantities for campaigns or multiple locations. 

Yes. You can order a single A-Frame or larger quantities for multi-location and national campaigns.

Our automated production system is designed to efficiently process both short runs and larger quantities. 

Once your order has been submitted it enters our automated production process immediately.

Because of this, orders cannot be changed or cancelled after submission. Please carefully check the size, quantity, artwork and proof before approving your order. 

No. The delivery details attached to the order are used by our automated production and dispatch process, so the delivery address cannot be changed once an order has been submitted.

Please make sure all delivery information is correct before checkout. 

Yes. Mediapoint is built exclusively for print resellers and orders can be blindshipped directly to your customer.

No Mediapoint branding is included with your customer's delivery, helping you maintain the relationship with your end customer. 

No. Mediapoint is a trade-only printer and artwork needs to be supplied print-ready to our specifications.

Our ordering system checks artwork against a range of production requirements and provides an online proof before approval. Always use the Preview function and carefully check the complete proof before submitting your order. 

Yes. You can order a single Corflute® A-Frame to review the material, construction, print quality and assembly before proceeding with a larger campaign. 

Choose from 600 × 900mm, A1 (594 × 841mm), A2 (420 × 594mm) or A3 (297 × 420mm). All sizes except A3 are available with or without an integrated carry handle. Artwork templates for each size are under the Download tab.

If artwork is approved before the daily 1pm cut-off, orders up to $2,000 + GST are dispatched in 2 business days, up to $3,000 in 3 business days and up to $4,000 in 4 business days. Larger orders show their date in your Job Summary. Prices are ex GST.

No. Corflute® is a registered trademark of Corex Australia. Mediapoint has permission from Corex to use the name when referring to the board we print on, but this does not extend to resellers. When marketing or reselling, use generic terms such as corrugated plastic A-frames or corrugated PP board.