9x9 Standard Mesh

We do not recommend cutting banners after production, and we do not offer wind slits (also known as moonholes) as part of our finishing. Each banner is sealed with reinforced welded edges and precision eyelet spacing to ensure strength and stability during installation. Cutting into the mesh whether manually or by adding moonholes can weaken the banner structure and increase the risk of tearing. 

Our internal testing has shown that moonholes do not significantly improve wind permeability. In fact, they often lead to stress points that reduce the stability of the banner, especially in high-wind environments. For windy sites, we recommend selecting an appropriate mesh grade (such as 6x6 open weave) and reducing eyelet spacing to ensure proper tension and wind flow.

Mesh banners should always be installed under proper tension to prevent flapping and reduce the risk of tearing. They must be secured tightly at all reinforced eyelet points using cable ties, rope, or approved fasteners especially along all edges. Banners that are left loose or unsupported can flap excessively, creating strain well beyond the mesh’s rated wind tolerance. 

If tearing occurs, it usually means the banner was subjected to wind loads above the recommended limits, as outlined in our product specifications. In such cases, Mediapoint does not accept responsibility for damage caused by improper installation, lack of bracing, or extreme weather exposure. Always match the mesh grade and eyelet spacing to the wind conditions of your site, and ensure the fence or structure is stable and able to hold tension across the full length of the banner.

Yes. Our system is built specifically for trade resellers and includes full white-label support. You can upload your logo, which we’ll include on the packaging label for brand consistency. We also allow you to attach any required shipping documents, such as packing slips or delivery notes, which are included with the shipment. 

All orders are blind shipped, meaning your customer will never see Mediapoint’s branding, only yours. This ensures a seamless and professional experience for your end client, while protecting your reseller relationship.

Our banners are finished with clear polypropylene Plastgrommet® eyelets, which offer several advantages over traditional metal eyelets. Polypropylene is rust-proof, UV-stable, and won’t corrode or stain the banner material over time making it ideal for outdoor use. These eyelets are also lighter and safer to handle, especially in high-traffic areas or construction sites where metal can pose a scratching hazard. 

From a sustainability perspective, polypropylene eyelets are fully recyclable and reduce the environmental impact of mixed-material waste. They also allow us to finish banners faster and more efficiently using automated equipment, which keeps turnaround times short and costs low without compromising durability.

No. 9x9 Standard Mesh orders must be submitted using the sizes, finishes, and turnaround times available in our system at the time of ordering, and we’re unable to accommodate one-off adjustments outside of those settings. Our standard mesh workflow is designed for consistent output and dependable delivery across trade volumes, and the system options reflect what we can produce efficiently while maintaining quality control. We do not offer a manual workaround for altering finishes or expediting one-off orders outside the platform, as it disrupts scheduling and creates inconsistency. If you have an idea for improvement, are ordering an alternate mesh specification in volume elsewhere, or believe there is broader demand across multiple customers, we welcome that feedback for long-term review.

9x9 Standard Mesh allows for custom heights and application-specific finishing, which prevents it from being produced using the same batch-based workflows as our fixed height mesh products. Because each job can vary in height and finish, orders must be printed, cut, and finished individually rather than combined on master rolls. This reduces production efficiency and increases setup time, handling, and material waste compared to standardised fixed height products. Additionally, finishing cannot be completed using our Plastgrommet All-In-One machine, requiring more manual or varied finishing processes. As a result, the overall production cost is higher, and this is reflected in the pricing. This product is ideal where size flexibility is critical, even though it comes at a higher cost than fixed height alternatives.