Stackable Display Cubes
The displays fold together without separate hardware and can be stacked to form branded towers, product displays and directional features. Interlocking notches help locate one unit on top of another while still allowing the display to be rearranged for different campaigns.
Produced from corrugated plastic and precision cut on our Zünd cutting table, Stackable Display Cubes are best suited to indoor or sheltered promotional use. They are lightweight rather than load-bearing and should not be used as seats, steps, tables or product-support structures. Final sizes, material thickness, stacking method and artwork templates must be confirmed through production testing before launch.
Job Summary
Stackable Display Cubes
Stackable Display Cubes turn unused floor space into a bold, three-dimensional branding feature. Printed in full colour across four visible sides, the units can be arranged individually or stacked into towers to showcase promotions, product ranges, wayfinding messages and campaign artwork from multiple viewing angles.
Each unit is made from lightweight corrugated plastic, precision cut and creased to fold together without separate hardware. The finished cubes are supplied flat packed, making them easier for trade resellers to store, transport and distribute to multiple locations.
The displays are designed as temporary promotional displays rather than structural furniture. They should be used indoors or in sheltered areas, kept away from strong wind and stacked on a flat, stable surface. Final stacking height should be limited to the configuration validated during Mediapoint production testing.
Flat-Packed & Easy to Assemble
Supplied flat packed for efficient transport and storage, then folded together on site without separate tools or hardware.
High-Impact 3D Branding
Create branded towers and modular displays that attract attention from multiple angles. Each visible face can carry its own message, graphic or product promotion.
Flexible Display Configurations
Use cubes individually or stack them into different layouts for retail campaigns, exhibitions, activations and recurring promotional displays.
Sustainability
Solar-Powered Production
Our Melbourne facility operates with a 99 kW solar system that generates most of our daytime energy, helping reduce the carbon impact of producing your display cubes.
Locally Printed in Australia
Printed and finished in Melbourne, supporting Australian manufacturing and reducing the transport emissions associated with overseas production.
Flat-Packed for Efficient Transport
The cubes are supplied flat packed, reducing their shipping volume compared with fully assembled displays and making storage more efficient between campaigns.
Reusable Display Format
When handled carefully, the cubes can be disassembled, stored flat and reused for repeat campaigns. Corrugated polypropylene recycling availability varies by council and commercial recycler, so customers should confirm local collection options.
FAQ
They are designed for retail promotions, exhibitions, events, offices, showrooms, product launches and other temporary branded displays. The cube and taller tower formats can be used individually or stacked to create towers and modular arrangements.
The cubes will be made from digitally printed 3mm corrugated plastic.
The four vertical faces are printed in full colour. The standard designs have a square footprint and an open top, including the taller 500 × 500 × 700 mm and 500 × 500 × 900 mm tower formats.
Each display is supplied flat packed and folds together using pre-cut tabs and slots. No separate tools or fixings should be required. A downloadable assembly guide and a short assembly video are recommended for launch.
Locking notches in the lower edges of each cube fit in the bottom cube. The bottom cube does not have any locator notches so you can knock them into places and be a bit flexible with positioning.
Corrugated plastic is water resistant, but the finished cubes are very lightweight and can be affected by wind. They are recommended for indoor or sheltered use and should not be left unattended outdoors.
No. They are display products only and must not be used as seats, steps, tables or supports for people or heavy products.
Yes. The four visible panels can contain different graphics within the same dieline. The customer must use the correct template and check the orientation of every panel before approving the proof.
Yes. Each unique design should be submitted as a separate kind. We do not charge kind fees for this product so quantity pricing is by the the total quantity. You upload and let us know the number of kinds in the ordering process when uploading artwork.
The available sizes are 300 × 300 × 300 mm, 400 × 400 × 400 mm, 500 × 500 × 500 mm, 500 × 500 × 700 mm and 500 × 500 × 900 mm. The final two options have a 500 × 500 mm footprint with additional height, making them suitable as taller display towers.
They are supplied printed, cut and flat packed. The customer folds and assembles them after delivery. Packaging should keep the sheets flat and protect the tabs, creases and printed surfaces.
They may be reused when assembled and disassembled carefully. Repeated folding, crushing, moisture, heat or rough handling can weaken the creases and locking tabs over time.
Supply one print-ready PDF using the exact Mediapoint template for the selected size. Keep important text and logos within the safe zones, extend backgrounds through the bleed area, outline fonts and check that every panel is correctly oriented before approval.
Download
Stackable Display Cubes General Artwork Guidelines
This document outlines the general artwork setup and file preparation requirements for Stackable Display Cubes and should be used together with the correct size-specific artwork template. It covers key requirements including artwork size, bleed, colour mode, file format, outlined fonts, panel orientation and the correct placement of graphics across each printed face. Following these guidelines helps ensure artwork is supplied print-ready and reduces the risk of sizing, alignment, folding or production issues during printing and assembly.
Stackable Display Cube Template – 300 × 300 mm
This artwork template is provided for Stackable Display Cubes with four 300 × 300 mm printed faces. It includes the correct flat artwork dimensions of 1279 × 300 mm, along with panel divisions, fold lines, locking tabs and the outer cut shape required for production. Use this template to position artwork correctly across each visible face. Do not move, resize or alter the supplied cut, fold or locking elements.
Stackable Display Cube Template – 400 × 400 mm
This artwork template is provided for Stackable Display Cubes with four 400 × 400 mm printed faces. It includes the correct flat artwork dimensions of 1679 × 400 mm, along with panel divisions, fold lines, locking tabs and the outer cut shape required for production. Use this template to position artwork correctly across each visible face. Do not move, resize or alter the supplied cut, fold or locking elements.
Stackable Display Cube Template – 500 × 500 mm
This artwork template is provided for Stackable Display Cubes with four 500 × 500 mm printed faces. It includes the correct flat artwork dimensions of 2113 × 500 mm, along with panel divisions, fold lines, locking tabs and the outer cut shape required for production. Use this template to position artwork correctly across each visible face. Do not move, resize or alter the supplied cut, fold or locking elements.
Stackable Display Cube Template – 500 × 700 mm
This artwork template is provided for Stackable Display Cubes with four 500 mm wide × 700 mm high printed faces. It includes the correct flat artwork dimensions of 2113 × 700 mm, along with panel divisions, fold lines, locking tabs and the outer cut shape required for production. Use this template to position artwork correctly across each visible face. Do not move, resize or alter the supplied cut, fold or locking elements.
Stackable Display Cube Template – 500 × 900 mm
This artwork template is provided for Stackable Display Cubes with four 500 mm wide × 900 mm high printed faces. It includes the correct flat artwork dimensions of 2113 × 900 mm, along with panel divisions, fold lines, locking tabs and the outer cut shape required for production. Use this template to position artwork correctly across each visible face. Do not move, resize or alter the supplied cut, fold or locking elements.
Stackable Display Cubes Corrugated Board Technical Data Sheet
This technical data sheet outlines the specifications of the corrugated board used to manufacture Stackable Display Cubes, including material composition, thickness, weight and relevant performance characteristics. The lightweight yet rigid construction is designed to create freestanding promotional displays that are easy to assemble, move and stack. It is best suited to indoor retail, exhibition, event and point-of-sale applications, with performance affected by handling, stacking configuration, moisture and environmental conditions.