Question 1

Where can Floor Stickers be used?

Accepted Answer

Floor Stickers can be used almost anywhere indoors on a clean, flat surface. They work perfectly in places like shops, offices, schools, showrooms, warehouses, transport hubs, and event venues. As long as the surface is smooth and sealed for example, tiles, polished concrete, vinyl, or sealed timber they’ll stick securely and look professional. They’re a great way to guide customers, promote sales, or decorate floors for events.

Question 2

Are they removable?

Accepted Answer

It depends on the material you choose. Avery 3302 has a removable adhesive that peels off without leaving sticky marks on most sealed floors. Avery 3300 is permanent, and Orajet 3554 is high-tack: it grips hardest for minimal lift but is harder to remove. The floor must be clean, dry and sealed before applying. Adhesive bonds get stronger over time, so don’t leave short-term graphics down for months, and peel slowly at a low angle when removing.

Question 3

What surfaces work best?

Accepted Answer

Floor Stickers stick best to smooth, flat, non-porous surfaces. The most reliable options are tiles, vinyl flooring, sealed wood, and polished concrete. They will not adhere properly to carpet, rough concrete, or dusty floors. Avoid areas that have oil, wax, or silicone coatings, as these can block the adhesive. For the strongest bond, always clean the floor well before applying and give the sticker at least 24 hours to fully set before heavy use.

Question 4

Can they be used on carpet or rough floors?

Accepted Answer

No. Floor Stickers cannot stick to carpet, uneven, or unsealed surfaces. The adhesive is made for smooth floors only. On textured or flexible surfaces like carpet, the sticker won’t stay flat and could lift or create a trip hazard. Always use them on a sealed, hard floor and press them down firmly during installation to make sure all edges are secure.

Question 5

Do they meet safety ratings?

Accepted Answer

Every Floor Sticker is finished with a textured anti-slip laminate: Lightly Textured (Sahara OV450) or Heavily Textured (Safari OV6603). Their slip-resistance ratings under AS 4586 are listed in each laminate’s technical data sheet in the Download tab, so check the sheet against your site’s requirements before ordering.

Question 6

How long do Floor Stickers last?

Accepted Answer

It depends on the laminate and how much foot traffic the area gets. Lightly Textured lasts around 1 to 3 months and Heavily Textured around 3 to 6 months, depending on use. In lower-traffic areas like showrooms, offices or display zones they can last longer. Both use UV-cured inks and scuff-resistant laminates. For best results, apply to clean, flat, sealed floors and avoid dragging heavy items across them.

Question 7

Are they waterproof?

Accepted Answer

Yes. Once printed and laminated, Floor Stickers are waterproof and handle spills, cleaning and everyday mopping without peeling or bubbling. They are made for indoor floors only and are not suitable for outdoor use.

Question 8

Can I change or cancel my order after placing it?

Accepted Answer

Once your order is placed, it can’t be changed or cancelled. Our system sends jobs straight into the automated print queue within minutes, so stopping production would interrupt other trade orders. You’ll always get a clear warning before checkout to confirm everything’s correct, so make sure your artwork and details are final before placing the job.

Question 9

Do you offer split packing or multiple delivery addresses?

Accepted Answer

We only deliver each job to one address. This keeps our production fast and our trade prices low. If you need items sent to different locations, we recommend using a third-party logistics (3PL) company. We can refer you to reliable partners who can handle split shipments for you.

Question 10

Can you help with artwork setup or design?

Accepted Answer

We don’t offer design or artwork setup services because we’re a trade-only printer. Our role is production, not design. However, our system automatically checks files for common problems—like missing bleed or trim boxes—so your job can move through production smoothly. This helps avoid delays while keeping your work print-ready.

Question 11

Do you offer trade accounts or is prepayment required?

Accepted Answer

All orders are prepaid unless you have an approved trade account. Accounts are only available for resellers who spend over $20,000 per year and have a strong credit record. Once you reach that level and show consistent order history, we can assess your eligibility through our credit partner. This policy ensures we keep prices competitive for all trade customers.

Question 12

Do you guarantee production or delivery times?

Accepted Answer

We’re proud of our reliability and aim to dispatch over 99% of jobs on or before schedule. Turnaround times shown in your account refer to production only, not courier delivery times. While we can’t control external freight delays, our production times are highly consistent and we’ll always communicate quickly if something unexpected happens.

Question 13

Can I get a sample before ordering a large run?

Accepted Answer

Yes, you can. If you’re planning a large order, it’s a good idea to get a small sample job first. This lets you check colour, finish, and slip texture before committing to a big print run. Our minimum order cost is low, so testing a sample is quick and affordable.

Question 14

Why does pricing change in steps instead of increasing evenly with quantity?

Accepted Answer

Floor Sticker pricing follows a true cost, linear metre based production model rather than per-unit or square metre pricing. Floor graphics are produced in continuous runs using specific substrates and laminates, and multiple stickers can often be positioned across the width of the material before additional linear metres are required. As quantities increase, pricing may remain the same until the next row or length of material is needed, at which point it steps up. This accurately reflects the cost of heavy-duty materials, laminating, cutting, handling, and waste, ensuring transparent pricing with no hidden recovery elsewhere. This model rewards efficient layout planning and delivers predictable pricing and stronger margins for resellers over time.

Question 15

Can you make exceptions to finishes or turnaround times for one-off floor sticker orders?

Accepted Answer

No. Floor sticker orders must be placed using the materials, laminates, and turnaround times available in our system, and we’re unable to make one-off changes outside of those settings. Floor graphics rely on specific substrates and finishes to meet durability, slip resistance, and handling requirements, and our production workflows are structured to ensure those standards are met consistently. We do not have a workaround for processing off-system requests for individual jobs, as it introduces compliance and performance risk. If you have feedback driven by repeat volume or ongoing customer need, we welcome that input for future system improvements.

Floor Stickers

Materials and anti-slip laminates

Sizes, shapes and turnaround

Job Summary

Floor Stickers

Heavy-Duty Vinyl

Slip-Resistant Finish

Clean Removable Adhesive Options

Sustainability

Low-VOC UVgel Printing

Solar-Powered Production

Locally Printed in Australia

Durable, Low-Waste Design

FAQ

Download

Floor Stickers Artwork Setup Guide

Avery Dennison MPI 3302 Easy Apply™ Material Specification

Avery Dennison MPI 3300 StaFlat™ Material Specification

ORAJET® 3554 Textured Surface Vinyl Material Specification

Sahara Frosty Clear Anti-Slip Laminate Material Specification

Safari Frosty Clear Anti-Slip Laminate Material Specification