Fixed Height Mesh - Top and Bottom Edge Finish

We do not recommend cutting banners after production, and we do not offer wind slits (also known as moonholes) as part of our finishing. Each banner is sealed with reinforced welded edges and precision eyelet spacing to ensure strength and stability during installation. Cutting into the mesh whether manually or by adding moonholes can weaken the banner structure and increase the risk of tearing.

Our internal testing has shown that moonholes do not significantly improve wind permeability. In fact, they often lead to stress points that reduce the stability of the banner, especially in high-wind environments. For windy sites, we recommend selecting an appropriate mesh grade (such as 6x6 open weave) and reducing eyelet spacing to ensure proper tension and wind flow.

Mesh banners should always be installed under proper tension to prevent flapping and reduce the risk of tearing. They must be secured tightly at all reinforced eyelet points using cable ties, rope, or approved fasteners especially along all edges. Banners that are left loose or unsupported can flap excessively, creating strain well beyond the mesh’s rated wind tolerance. 

If tearing occurs, it usually means the banner was subjected to wind loads above the recommended limits, as outlined in our product specifications. In such cases, Mediapoint does not accept responsibility for damage caused by improper installation, lack of bracing, or extreme weather exposure. Always match the mesh grade and eyelet spacing to the wind conditions of your site, and ensure the fence or structure is stable and able to hold tension across the full length of the banner.

Yes. Our system is built specifically for trade resellers and includes full white-label support. You can upload your logo, which we’ll include on the packaging label for brand consistency. We also allow you to attach any required shipping documents, such as packing slips or delivery notes, which are included with the shipment. 

All orders are blind shipped, meaning your customer will never see Mediapoint’s branding, only yours. This ensures a seamless and professional experience for your end client, while protecting your reseller relationship.

Our banners are finished with clear polypropylene Plastgrommet® eyelets, which offer several advantages over traditional metal eyelets. Polypropylene is rust-proof, UV-stable, and won’t corrode or stain the banner material over time making it ideal for outdoor use. These eyelets are also lighter and safer to handle, especially in high-traffic areas or construction sites where metal can pose a scratching hazard. 

From a sustainability perspective, polypropylene eyelets are fully recyclable and reduce the environmental impact of mixed-material waste. They also allow us to finish banners faster and more efficiently using automated equipment, which keeps turnaround times short and costs low without compromising durability.

No. Fixed Height Mesh with Top and Bottom Edge Finish orders must be placed using the sizes, finishing options, and turnaround times available in our system at the time of ordering, and we’re unable to make exceptions or manually process one-off requests outside of those options. This product runs through structured finishing workflows to ensure consistent edge strength, clean hems, and reliable performance when installed, and our production schedule relies on standardised processes to deliver predictable lead times across trade volumes. We do not have a workaround to bypass the system for individual jobs, even when a request seems small, as it creates risk to workflow, quality control, and delivery commitments. If you have a suggestion to improve the range, regularly require a particular mesh configuration from another supplier, or believe there is sustained demand across multiple customers, we welcome that feedback for consideration as a long-term system enhancement.

This product is fixed at a standard height, which allows us to batch large volumes of orders together on our master rolls and run them efficiently through our Plastgrommet All In One Finishing machine. Because both the print and finishing processes are standardised, we’re able to produce and finish a high number of mesh banners per hour with minimal handling and setup changes. This efficiency significantly reduces production time and waste, allowing us to pass those savings on through sharper pricing and better margins for resellers. If you require a mesh height outside of the fixed options, we offer alternative stock products via the menu, however these are priced higher as they must be produced individually and cannot be batched through the same high-volume workflow.