Order by 12 noon AEST for Next Day Dispatch on a Pull Up Banner – Up to 12 stands
13-24 stands – 2 business days
25+ Stands – Speak to us
Pull Up Banners are used in indoor environments where a cost-effective solution is needed. Commonly used in Office Receptions, Board Rooms, Exhibition/Trade Shows & Indoor Events.
We print a pull up banner with a 420gsm block out PVC stock. It also has a textured feel for a more premium feel. We offer pull up stands in an 850mm x 2000mm banner size. All stands come with an individual box and carry bag for easy transportation.
Please see the link below to get pricing pull up banners. For more information on this product please see the tabs below.Get Pricing
Due to the low cost in purchasing a new stand finished with print it is not feasible to do this. Also, the stands we used are designed to be a 1 time use product. Even if you factored in the cost of re-usable stands, it would not be feasible compared to just replacing it with a new pull up banner.
Outdoors there is a risk of wind hitting the print. When this happens the print turns into a sail and will tear from the head and base. These stands are an indoor only product.
We have chosen to print pull up banners on a high-quality UV printing process with no banding. We have chosen this deliberately over latex printing which uses heat. Having flat prints throughout the life of your stand is paramount. Any heat will cause curling over time.
We have chosen to print on a premium stock and print with a low temperature process to keep the stock as flat as can be. We have tested this stock for over a year at a time and it has stayed relatively flat over this time. This gives the stock and stand a more relative premium feel.
General Artwork Guidelines
- Fonts must be converted to outlines
- 3mm bleeds
- Not having trim marks for rectangle artwork is preferred
- Please include finished size and quantity in file name
- PDF artwork only
- Provide artwork at 100% final size
- Artwork to be in CMYK colour - for any colours which need matching we need pantones and there are additional fees for colour matching
Custom Finishing Guidelines
Please put your artwork on the Artwork layer and ensure it is the top layer
If your artwork needs any Creasing please place a white stroke on the Crease layer indicating where you want this to be
If your artwork needs any Kiss-cut please place a white stroke on the Kiss-cut layer indicating where you want this to be
If your artwork needs any Holes drilled please place a 6mm white circle on the Drill layer indicating where you want this to be
If your artwork needs any V-Cutting please place a white stroke on the V-cut layer indicating where you want this to be
If your artwork needs any Custom Cutting please place a white stroke on the Thru-cut layer indicating where you want this to be
If your artwork needs any Routing for any Composite Board or Acrylic printing please place a white stroke on the Thru-cut layer indicating where you want this to be