fbpx

Magnet

Order by 3pm AEST for 2 business day lead time – square cut, single sided, single artwork jobs without any special finishing under $1300+GST
Under $2600+GST – 3 business days
Under $3999+GST – 4 business days
Over $4000+ – Speak to us
Special Finishing such as custom shape cutting will add a day to the lead time

Magnets are a great tool for having a temporary sign on a vehicle or other similar surface. Unlike a Sticker which is single use, a magnet with proper care can be used time and time again.

The difference with Mediapoint Magnet’s is that we offer direct flatbed printed magnets and not stickers mounted to magnets. Vehicle Magnets can be cut to different shapes. We use a .9mm thick magnet which is suited for vehicle use.

We can supply magnet to custom sizes and shapes under 590mm x 1200mm as well as a range of finishing options. Please see the link below to get pricing on Magnets for your customers. Also see below more information below which should answer most of your questions.

Get Pricing
What Is The Finish Of The Ink & Can Magnet Be Laminated?

UV ink printed on Magnets has a matt finish. Unfortunately, we do not offer any board coating services to change the finish of the ink or offer extra protection. This means the ink can be scratched with Abrasion.

What Is The Longest A Magnet Should Remain On A Vehicle?

We advise taking your magnet on and off after use.

Do Your Offer A Thinner Magnet For Fridges?

Unfortunately, we do not offer anything thinner. We are not suited to large run fridge magnets which are still suited to other printing methods. But if you do need a sample or a small of custom shape magnets our .9mm stock may still work.

What Is the Max Size Available?

The max size we offer magnet in is 590mm x 1200mm.

What Is The Benefit of Flatbed Printing Straight To Magnet Over Mounting Stickers To It?

The biggest disadvantage we have seen with SAV mounted to magnet is that over time the SAV can peel off the magnet. By flatbed printing to the magnet, this issue is avoided.

No specifications

General Artwork Guidelines
- Fonts must be converted to outlines
- 3mm bleeds
- Not having trim marks for rectangle artwork is preferred
- Please include finished size and quantity in file name
- PDF artwork only
- Provide artwork at 100% final size
- Artwork to be in CMYK colour - for any colours which need matching we need pantones and there are additional fees for colour matching


Custom Finishing Guidelines
Please put your artwork on the Artwork layer and ensure it is the top layer
If your artwork needs any Creasing please place a white stroke on the Crease layer indicating where you want this to be
If your artwork needs any Kiss-cut please place a white stroke on the Kiss-cut layer indicating where you want this to be
If your artwork needs any Holes drilled please place a 6mm white circle on the Drill layer indicating where you want this to be
If your artwork needs any V-Cutting please place a white stroke on the V-cut layer indicating where you want this to be
If your artwork needs any Custom Cutting please place a white stroke on the Thru-cut layer indicating where you want this to be
If your artwork needs any Routing for any Composite Board or Acrylic printing please place a white stroke on the Thru-cut layer indicating where you want this to be

No options