Order by 3pm for following lead times
Under $2600+GST – 2 business days
Under $3999+GST – 3 business days
Over $4000+ – Speak to us
Special Finishing such as custom shape cutting will add a day to the lead time
Polypropylene is a very durable outdoor stock that can withstand heat, wear and tear. It’s fuss-free, long-standing nature makes it a popular choice for OHS & Site Safety Boards. Polypropylene is a stock composed of condensed propylene which makes it solid throughout. This is the same material used in corflute boards. However, it is much heavier per square meter and is not as rigid as corflute. Also, unlike corflute, this stock has an exceptionally smooth surface that facilities a fantastic printing result for attention-grabbing, legible signage that will stand the test of time.
We can supply polypropylene to custom sizes and shapes under 2400mm x 1200mm as well as a range of finishing options. Please see the link below to get pricing on Polypropylene for your customers. Contact us for further information or refer to the answers to some of the most commonly asked questions below.Get Pricing
UV ink printed on Polypropylene has a matt finish and provides great visibility, durability and true-to-design colour. Unfortunately, we do not offer any board coating services to change the finish of the ink or offer extra protection.
Mediapoint offers a 1.4mm thick polypropylene stock.
The largest polypropylene stock that we currently offer is 1200mm x 2400mm.
Even though the ink is rated up to 2 years in sunlight, factors such as humidity or extreme sun exposure can affect the rating.
General Artwork Guidelines
- Fonts must be converted to outlines
- 3mm bleeds
- Not having trim marks for rectangle artwork is preferred
- Please include finished size and quantity in file name
- PDF artwork only
- Provide artwork at 100% final size
- Artwork to be in CMYK colour - for any colours which need matching we need pantones and there are additional fees for colour matching
Custom Finishing Guidelines
Please put your artwork on the Artwork layer and ensure it is the top layer
If your artwork needs any Creasing please place a white stroke on the Crease layer indicating where you want this to be
If your artwork needs any Kiss-cut please place a white stroke on the Kiss-cut layer indicating where you want this to be
If your artwork needs any Holes drilled please place a 6mm white circle on the Drill layer indicating where you want this to be
If your artwork needs any V-Cutting please place a white stroke on the V-cut layer indicating where you want this to be
If your artwork needs any Custom Cutting please place a white stroke on the Thru-cut layer indicating where you want this to be
If your artwork needs any Routing for any Composite Board or Acrylic printing please place a white stroke on the Thru-cut layer indicating where you want this to be
Double taping on rear of board. Pricing is per side length. If you want all 4 sides taped please select a quantity of 4. Please indicate in your job notes where you would like this placed.
We can offer 6mm holes as an option. You will need to add the 6mm holes as a Thru-cut as per our artwork specs. Please note that on corflute the holes will be jagged due to the stock.
Cutting to simple shapes such as rounded corners are included. A simple shape is any which does not have more than 5 points or changes in curves. We may reject your artwork if the cutting is too intricate.