Shelf Wobblers

Order by 3pm AEST for 2 Business Day Dispatch –  single artwork jobs with quantity under 300
300-500 – 3 business days
500+ Speak to Us

Shelf Wobblers are a common product down the aisles or most supermarkets. Printed on a 200gsm synthetic paper we can cut your wobblers to simple custom shapes. We also apply tape to the top of the face on the T-Bar section.

See the product specifications tab on the right for templates for a shelf wobbler. You can use our set shapes or create your own simple shape. The T-Bar is in the template as well.

Please see the link below to get pricing on Shelf Wobblers for your customers. Also see below more information below which should answer most of your questions.

Get Pricing
What Stock Options Are Offered?

We only offer Wobblers on a 200gsm Yupo Synthetic stock. It is unlaminated, waterproof and fairly tear resistant and we have found this to be the most suitable stock.

What Is The Quality Of The Print?

The print is digitally done so solid colours can appear grainy. If your customer is after offset quality, then this product would not be suited. We also cannot provide a gloss finish.

Can You Offer Intricate Cuts?

No, we do not offer intricate cuts. We can only offer basic cuts with simple curve shapes. Your artwork may be rejected if it contains to many points. Please see product specifications for examples of suitable wobbler templates. As a guide have not more than 5 points per artwork.

Where Is The Wobbler Taped?

We tape the wobbler on the top of the stem on the front ink side. You can also choose to not have any taping of wobblers if you wish.

Circle Template

117mm x 197mm

Square Template

117mm x 197mm

General Artwork Guidelines
- Fonts must be converted to outlines
- 3mm bleeds
- Not having trim marks for rectangle artwork is preferred
- Please include finished size and quantity in file name
- PDF artwork only
- Provide artwork at 100% final size
- Artwork to be in CMYK colour - for any colours which need matching we need pantones and there are additional fees for colour matching


Custom Finishing Guidelines
Please put your artwork on the Artwork layer and ensure it is the top layer
If your artwork needs any Creasing please place a white stroke on the Crease layer indicating where you want this to be
If your artwork needs any Kiss-cut please place a white stroke on the Kiss-cut layer indicating where you want this to be
If your artwork needs any Holes drilled please place a 6mm white circle on the Drill layer indicating where you want this to be
If your artwork needs any V-Cutting please place a white stroke on the V-cut layer indicating where you want this to be
If your artwork needs any Custom Cutting please place a white stroke on the Thru-cut layer indicating where you want this to be
If your artwork needs any Routing for any Composite Board or Acrylic printing please place a white stroke on the Thru-cut layer indicating where you want this to be

No options