Order by 3 pm AEST for 5 Business Day Dispatch – Orders under $2500+GST
Under $2500+GST – 5 business days
Over$2501+ – Speak to us
Banners with KEDA are perfect for installing into Sail Track Extrusions. Essentially, we create large scale banners and then weld the keda feature around the edge of the sign for easy installation into your tracking. This product is used as a cost-effective alternative to traditional because it allows banners of all sizes and even billboards, to be replaced with a simple slide of the mechanism. At the same time, the securely welded KEDA ensures your banner withstands the strongest of winds and stays firmly in place.
Typical surfaces where KEDA Banners get installed are factories, hoardings, fences and other flat surfaces. We can supply KEDA Banners to custom sizes under 2400mm x 10000mm.
Please see the link below to get pricing on KEDA Banners for your customers. For more information about the product, contact us or browse the most frequently asked questions below.Get Pricing
Unfortunately, we only provide the banner. We do not get involved with any fixings. We also are just a trade printer and do not get involved in any installations. Contact us and we will happily work with you to identify the most compatible product for your resources.
We weld KEDA straight onto the banner for added security, so you can rest assured that your sign will remain firmly in place.
Latex inks are rated as fade resistant for up to 2 years in outdoor conditions. We do not laminate or coat.
We can print up to 2.4 meters high and up to 10m long on this product.
The size which is entered in our IQ system is the size the actual banner is printed and cut to. The KEDA is then added to the banner adding 15mm to the width and height of your finished size.
General Artwork Guidelines
- Fonts must be converted to outlines
- 3mm bleeds
- Not having trim marks for rectangle artwork is preferred
- Please include finished size and quantity in file name
- PDF artwork only
- Provide artwork at 100% final size
- Artwork to be in CMYK colour - for any colours which need matching we need pantones and there are additional fees for colour matching
Custom Finishing Guidelines
Please put your artwork on the Artwork layer and ensure it is the top layer
If your artwork needs any Creasing please place a white stroke on the Crease layer indicating where you want this to be
If your artwork needs any Kiss-cut please place a white stroke on the Kiss-cut layer indicating where you want this to be
If your artwork needs any Holes drilled please place a 6mm white circle on the Drill layer indicating where you want this to be
If your artwork needs any V-Cutting please place a white stroke on the V-cut layer indicating where you want this to be
If your artwork needs any Custom Cutting please place a white stroke on the Thru-cut layer indicating where you want this to be
If your artwork needs any Routing for any Composite Board or Acrylic printing please place a white stroke on the Thru-cut layer indicating where you want this to be
KEDA Rope welded around the perimeter of the banner. Please note the size of your banner that you select, is the size we will cut the banner to before adding the KEDA rope to the banner.